Installation guide

Getting Started 84
Synapse Installation Guide
Set/Edit Static IP
If your business requires a static IP address, contact your network administrator.
 To set and edit static IP Address:
Figure 80. 030/031 IP Settings
Figure 81. 030/031 Set/Edit Static
IP
1. Access the Admin Settings menu: Press MENU,
then press 3 on the dial pad, then enter the
Admin password, and press SELECT.
2. Press 3 on the dial pad to display the IP Settings
screen shown in Figure 80 and Figure 82.
3. Press 2 to display the screen shown in Figure 81
or Figure 83.
4. Enter digits:
 There is a 12-digit limit on the number field
(not including dots).
 On the 030/031, pressing the pound key (#)
inserts a dot. On the 020, pressing
inserts a dot.
 Pressing when the cursor is
positioned next to a dot deletes the dot and
the digit to the left of the dot.
5. Press the or Navigation key to cycle
through the four fields.
6. Press to accept the changes and return
to the Admin Settings menu.
Figure 82. 020 IP Settings
Figure 83. 020 Set/Edit
Static IP
Quick
Dial
2. Set/Edit Static IP
Save
IP Settings
3. IP Status
1. IP Configuration Auto
Use or to move highlight.
Use or to cy cle through options.
Quick
Dial
Save
Static IP Edit
IP Address:
Subnet Mask:
Gate w ay:
DNS Se rver :
Backspc
Use dial pad to enter digits and press #
to enter a dot.
IP Settings
1. IP Configuration
2. Set/Edit Static IP
3. IP Status
Set/Edit Static IP
IP Address:
Subne t M ask :
Save Backspc"."