Installation guide

Getting Started 82
Synapse Installation Guide
Deskset IP Settings
Synapse system devices are connected to a LAN so they can communicate with each other. See “System Installation Overview”
on page 14 for a discussion of the Synapse network configuration and IP settings.
 To display the IP Settings screen:
Figure 73. 030/031 IP Settings
1. Access the Admin Settings menu: Press MENU,
then press 3 on the dial pad, then enter the
Admin password (12345 is the default password),
and press SELECT.
2. Press 3 on the dial pad to display the IP Settings
screen shown in Figure 73 and Figure 74.
3. Perform one of the following:
a. Press 1 to select IP Configuration. See “To
set the IP Configuration:” on page 83.
b. Press 2 to select Set/Edit Static IP. See “To
set and edit static IP Address:” on page 84.
c. Press 3 to select IP Status. See “To view the
IP status:” on page 85.
Figure 74. 020 IP Settings
Quick
Dial
2. Set/Edit Static IP
Save
IP Settings
3. IP Status
1. IP Configuration Auto
Use or to move highlight.
Use or to cy cle through options.
IP Settings
1. IP Configuration
2. Set/Edit Static IP
3. IP Status