Installation guide

Getting Started 79
Synapse Installation Guide
 To upgrade the ATA software to the latest version: (Continued)
Figure 70. Downloading
Software
3. If new software is available, you are prompted to initiate the upgrade by pressing ,
or abort by pressing .
 Once the downloading starts, the display indicates the progress as shown by the
percentage indicator, as shown in Figure 70. The device restarts automatically once
the programming is completed.
 If the programming process is interrupted by removing the server connection, no
restart occurs. The process does not resume even after the server connection is
reestablished. The ATA remains on the xx% complete screen until an action is taken
at the ATA.
 Pressing during the programming process terminates the download and
returns you to the Configuration menu. The previous software version remains in
effect.
 When the upgrade is complete, the screen briefly displays 100% complete, then 0%
complete for few seconds, before restarting the ATA.
4. Press repeatedly until you return to the ATA Main menu.