Installation guide

Getting Started 76
Synapse Installation Guide
ATA Front Panel Interface
You can access basic information and perform some configuration tasks using the ATA front panel. These tasks are easier to do
using the WebUI. See “The Web User Interface (WebUI)” on page 89.
The ATA displays the Idle menu after powering up. Access the ATA Main menu to perform the system operation functions. The
Idle screen is different, but the menus are the same as that of the PSTN Gateway.
Figure 66. ATA Idle Screen
Figure 67. ATA Menu Screens
To access the ATA Main menu from the Idle screen, as shown in Figure 66, press the
key. The menu provides the following functions:
 Device Information
 Network Status
 Configuration
Press the key to highlight an entry, then press to see information about
your ATA or your network, as shown in Figure 67. Select Configuration to view or
modify some ATA settings. Here is the information you can see in Device Information and
Network Status:
Device Information
 Model #
 Serial #
 Boot Version
 Software Version
 Firmware Version
Network Status
 IP Address
 Subnet Mask
 Default Gateway
 DNS Server X
 MAC Address
 Network Port
 Local Address
30)HE
6\QFKURQL]HG
,3
$7$
Dev ic e Inf ormation
Netw ork Status
Configuration
Netw ork Status
IP Address: (DHCP)
192.168.0.100