Installation guide

Getting Started 71
Synapse Installation Guide
Gateway Configuration
Figure 61. Gateway
Configuration
Press / in the Gateway Main menu until Configuration is highlighted, as
shown in Figure 61, and press to display the Configuration menu. The current setting
is indicated with . You can use this interface or the WebUI to upgrade software.
Configuration — Current Gateway settings.
 Auto IP — Is set automatically.
 Static IP — You can change the static IP only from the Gateway. See your network
administrator if you require details regarding IP assignments.
 Restore Defaults — Highlight Restore Defaults and press and hold for two
seconds when prompted to restore the Gateway to factory defaults.
 Upgrade Software — Highlight Upgrade Software and press . If new software
is available, you are prompted to press again to accept the upgrade.