Installation guide

Getting Started 67
Synapse Installation Guide
T1 Gateway Features
Figure 57 illustrates the T1 Gateway features and connections.
Figure 57. T1 Gateway Features and Connections
1. Display Provides system and network status, device information, and configuration data. See
“Gateway Front Panel Interface” on page 69.
2. Reset When pressed momentarily, restarts the Gateway.
When pressed and held for more than five seconds and with the LAN cable not connected,
restores factory defaults.
3. T1 Port
4. RJ-45 Ethernet Network Port 10Base-T/100Base-Tx with Auto MDI/MDI-X switching.
5. DC 12V Power-Supply Jack
1
2 3 4 5