Installation guide

Installation 24
Synapse Installation Guide
Single-Zone OHP equipment connected to one of the FXS ports:
Use this configuration to connect paging equipment that interfaces through a telephone line. Typically, any OHP that connects to
an FXS port has some intelligence to go off and on hook or otherwise send a signal back to the pager. These are generally controllers
or telephone interfaces with controls and settings.
In this configuration, you can specify a paging delay to
compensate for the fixed delay introduced by the OHP
system. This delay ensures that the paging tone is
played simultaneously on both Desksets and on the
OHP system. See “Single-Zone Overhead Paging
Delay” on page 124.
Figure 10. Single-Zone Overhead Paging on FXS Port