Installation guide

Troubleshooting 194
Synapse Installation Guide
Multi-zone OHP is not
working and the FXS LED for
the FXS port that is used for
the OHP equipment is
flashing GREEN.
Someone has initiated a page,
but the OHP equipment has
not yet acknowledged the
page request.
 Verify the connection between the FXS port and your OHP
system. See “Overhead Paging Overview” on page 22.
 Verify your paging equipment configuration. Check to see
if the OHP system has settings that need to be adjusted
to work with Synapse.
Symptom Probable Cause Corrective Action ATA Multi-Zone OHP to an FXS Port