Installation guide

Installation 16
Synapse Installation Guide
System Installation Overview with Optional Analog Terminal Adapter
If you have analog devices that you want to attach to the system, you will need an AT&T SB67050 Analog Terminal Adapter (ATA).
The Synapse system supports one ATA per system. The ATA allows you to attach hardware such as conference phones, overhead
paging equipment, a fax machine, or a source for Music On Hold (MoH) to Synapse. Figure 8 illustrates a more complex installation
(blue lines = telephone; red lines = Ethernet; orange lines = audio), but there are different options for attaching some of the
equipment to the ATA.
Install the ATA after you have installed at least one Gateway and the Desksets.
Figure 8. Example of a System Featuring an ATA
Deskset
GatewayLocal Area Network (LAN) PSTN Plug
Music on Hold
Source
Fax Machine
ATA
Analog Telephone/
Conference Phone/
Door Phone
Overhead
Paging
System