Installation guide

Installation 10
Synapse Installation Guide
C HAPTER
1
I NSTALLATION
This section describes the physical installation of the Synapse devices. Each system must
include at least one PSTN Gateway or one T1 Gateway. Each PSTN Gateway supports up to
four analog telephone lines. Up to four PSTN Gateways can support up to 16 analog
telephone lines. The T1 Gateway supports up to 23 T1 PRI voice channels.
 “System Overview” on page 11
 “Planning Your System and Network Configuration” on page 19
 “Recommended Installation Sequence” on page 17
 “Planning Your System and Network Configuration” on page 19
 “Site Preparation” on page 32
 “Assigning Telephone Lines and Extensions” on page 35
 “Gateway and ATA Placement” on page 37
 “Gateway Installation” on page 41
 “Deskset Installation” on page 45
 “SB67050 ATA Installation” on page 52
 “SB67040 Cordless Handset Installation” on page 58
 “TL7600 Cordless Headset Installation” on page 61.
You can view Synapse installation videos at www.telephones.att.com/smb.
In the left navigation menu, click on Product Support and then Video Gallery.