Installation guide

System Configuration 105
Synapse Installation Guide
 To manually assign Direct Inward Dial numbers: (Continued)
Figure 116. DID Assignment on Extension Basic Settings page
Figure 117. DID Assignments, Part 2
4. In the center of the page, use the Select DID
drop-down list to select a DID Number. Only
available DID Numbers appear in the list.
Select Unassigned to release the DID Number
and make it available.
If you assign a DID Number to an extension that
already has a DID Number assigned to it, the new
number is assigned; the old DID Number is
released.
5. When you are done, click to save these
settings or click to refresh the page
without saving the changes.
6. To edit the DID numbers of other extensions,
select another extension from the Select
Extension drop-down list and repeat steps 5
and 6.
7. To return to the Direct Inward Dial
Assignments page, as shown in Figure 117,
press System Settings, then Direct Inward
Dial, and then DID Assignments.