Installation guide

System Configuration 103
Synapse Installation Guide
 To set up Direct Inward Dial numbers: (Continued)
Figure 114. DID Configuration, Part 2
5. Enter the DID range into the boxes beneath Add Direct
Inward Dial Range. Click to enter the phone
number range into the Current DID Ranges list. These
ranges describe the DID numbers that your service
provider assigned to you. The system cannot check
whether you have subscribed to these DID numbers, but
it checks that all numbers are ten digits long, with no
spaces or hyphens, and that there are no more than 200
DID numbers.
To add only one DID number, enter it into both range
fields.
You can define up to 50 ranges.
6. Optional: To delete unwanted DID number ranges, select
the unwanted DID number range in the Current DID
Ranges list and click .
7. When you are done, click to save these settings or
click to refresh the page without saving the
changes.
If you assign Direct Inward Dial numbers with the
first digit of any extension that overlaps an Auto
Attendant menu numeric key value, callers will be
unable to dial those extensions. Instead, they will
be connected to that Auto Attendant menu
action.