User`s guide

Getting Started 32
AT&T SB67040 Cordless Accessory Handset User’s Guide
 To register the Handset: (Continued)
Figure 21. Cordless Registration
4. Press 5 on the Deskset dial pad to display the
Cordless Registration menu shown in Figure 21. The
screen reflects whether the Handset and Headset
are registered.
5. Press 1 on the Deskset dial pad to begin the
registration process.
6. To register the Handset press , as shown in
Figure 24.
Once the Handset registration begins, the Handset
and Deskset display the registration messages shown
in Figure 22.
 The Handset displays Handset Registered, as
shown in Figure 22.
 The registration process on both Deskset and
Handset ends after two minutes.
If the registration process times out, the Handset
displays Registration Failed, as shown in
Figure 23, generates an error tone, and resets.
Try registration again.
 When registration is complete, the Handset
generates a confirmation tone.
7. Press to return to the Cordless Registration
screen.
Figure 24. Register Cordless
Handset
12:00a Dec 01
Registration in
progress...
12:00a Dec 01
Handset
Registered.
Figure 22. Registration
Messages
12:00a Dec 01
Registration
Failed.
Figure 23. Registration
Failed
Quick
Dial
Cordless Handset Registration
Cordless Handset is currently
Not Registered.
Register Ex it
Place Cordless Handset in charger.
Press Register to begin process.