User`s guide

Getting Started 31
AT&T SB67040 Cordless Accessory Handset User’s Guide
Handset Registration
This procedure provides instructions for registering a Handset. Only one Handset and one Headset can be registered to a Deskset.
For complete information on cordless device registration, see the “SB67030 Deskset User’s Guide”.
 To register the Handset:
Figure 18. Place In Charger
Figure 19. Register Handset
If the Handset is not registered to a Deskset, the Place in charger notification
screen shown in Figure 18 displays upon powering up.
1. Place the Handset into the Charger. The Handset generates a beep and the
Register Handset screen shown in Figure 19 displays.
2. Press MENU on the Deskset.
3. Press 2 on the Deskset dial pad.
If you have set a user password, the User
Password screen shown in Figure 20
displays.
 Enter your password and press
SELECT.
 To correct errors, use the key.
 To can cel your cha nges on that scree n,
press at any time. The set will
return to the previous screen.
12:00a Dec 0112:00a Dec 0112:00a Dec 01
Place in charger.
12:00a Dec 0112:00a Dec 0112:00a Dec 01
To register Handset:
1. Go to your
Des ks et.
2. Press MENU.
3. Select User
REGISTER
1/3
Quick
Dial
User Passw ord
Enter user password:
Backspc Canc el
Use dial pad to enter user password.
Press SELECT when done.
Figure 20. Enter User Password