User`s guide

Getting Started 28
AT&T SB67040 Cordless Accessory Handset User’s Guide
Battery Installation
The Handset uses a rechargeable 2.4v nickel-metal hydride cell (NiMH) pack and comes with a battery Charger.
 To install the Handset battery:
Figure 13. Install Handset Battery
1. Remove the battery cover by pressing and sliding the cover downward, as
shown in Figure 13.
2. Plug the battery connector securely into the plug inside the Handset
battery compartment, matching the color-coded label.
3. Place the battery in the compartment with THIS SIDE UP facing up as
indicated.
4. Align the cover flat against the battery compartment, then slide it upward
until it clicks into place.
5. Press PHONE. The LCD displays a white background during startup.
 After startup, if the battery is sufficiently charged, the LCD displays the
screen shown in Figure 14.
 If the screen is blank, place the Handset in the Charger.
Figure 14. Place In Charger
Battery Connector
12:00a Dec 0112:00a Dec 0112:00a Dec 01
Place in charger.