Manualshelf

User`s guide

ManualsBrandsAT&T ManualsConsumer electronicsSB67040
21222324252627282930
Getting Started 27
AT&T SB67040 Cordless Accessory Handset User’s Guide
Charger Installation
The Handset uses a rechargeable 2.4V nickel-metal hydride cell (NiMH) pack and comes with a battery Charger. Place the Handset
in the Charger when not in use.
To plug the Handset Charger into AC power:
Figure 12. Handset Charger Power Connect
1. Plug the power adapter into an electrical outlet not controlled by a
wall switch.
2. Plug the small end of the power adapter into the jack on the
underside of the Charger.
3. Route the cord through the slot, as shown in Figure 12.