User`s guide

Deskset Settings 126
Synapse SB67020 Deskset User’s Guide
Volume Settings
Set the Speaker, Receiver, Headset, and Paging volumes using the Volume Settings menu. You can also adjust each of these
volumes while you are on a call by pressing VOL+ and VOL–.
 To access the Audio menu:
Figure 193. Speaker
Volume
Figure 194. Receiver
Volume
Figure 195. Headset
Volume
Figure 196. Paging Volume
1. Press MENU, then 2, then 3, and then 3 (Call Appearance mode) or MENU, then 2, then
2, and then 3 (Line Appearance mode) to access the Volume Settings menu, as shown
in Figure 193.
 Press the navigation key, and then the or navigation key to set the Speaker
Volume from 1 to 9, as shown in Figure 193. The default is 4.
 Press the navigation key, and then the or navigation key to set the Receiver
Volume from 1 to 9, as shown in Figure 194. The default is 3.
 Press the navigation key, and then the or navigation key to set the Headset
Volume from 1 to 9, as shown in Figure 195. The default is 4.
 Press the navigation key, and then the or navigation key to set the Paging
Volume from 1 to 9, as shown in Figure 196. The default is 4.
2. Press to accept the adjustments and return to the Deskset Settings menu.
Volum e Settings
Speaker Volum e: 4
Receiver Volum e: [3]
Save
Volum e Settings
Speaker Volum e: [4]
Receiver Volum e: 3
Save
Volum e Settings
Receiver Volum e: [3]
Headset Volum e: 4
Save
Volum e Settings
Headset Volum e: [4]
Paging Volum e: 4
Save