Installation guide

AT&T SB67010/AT&T SB67030 Installation Guide 7 Deskset Installation
 To connect the corded Handset and an optional corded headset:
Figure 8. Handset Plug
 Connect a corded handset:
1. Plug the coiled end of the handset cord into the handset jack on
the left side of the telephone, as shown in Figure 8.
2. Plug the 5-inch straight end of the handset cord into the handset,
then hang up.
 Connect an optional corded headset:
1. Plug an optional
corded headset into
the RJ9 connector
indicated in Figure 9.
2. Press HEADSET to
use the corded
headset.
The corded headset
takes precedence
over the cordless
headset.
Handset
Cord
Handset
Jack
Optional Corded Headset Jack
Figure 9. Optional Headset Install
CAUTION: Do not plug the corded headset into the jack
for the corded handset.