Installation guide

AT&T SB67010/AT&T SB67030 Installation Guide 23 Web User Interface (WEBUI) Overview
You can create actions using the Menus selection under Auto Attendant in the navigation menu on the left.
 To add actions to menus:
Figure 31. Auto Attendant Menu Editor - Part 2
Example: For our example on page 19, the menu name
could be “day”. At the Press 1 drop-down menu, choose
“sales team” from the menus that you have created. At the
Press 3 drop-down menu, choose a ring group that you
have created. From the menus that you created, choose
“hours” from the drop-down menu next to Press 9, and
make sure that Direct Dial and Operator are enabled.
 Allow callers to dial users’ extensions directly by
selecting the Enable Direct Dial On button shown in
Figure 30 "Auto Attendant Menu Editor - Part 1 " on
page 22. Callers will not be able to press 2 for other
actions.
 Allow callers to press 0 (zero) to reach the operator,
(defaulting to Extension 200) by selecting the Enable
Operator On button. Callers will not be able to press 0
for other actions.
 Choose from the drop-down menus next to the Press #
boxes shown in Figure 31 to define the result of a
caller’s dial pad selection.
z Choose Directory for the Company Directory. Users
can create name recordings at their Desksets. See
“Recording User Name” on page 19.
z Choose to replay a menu, or go to the previous or
opening menu.
z Choose another menu you have created.
z Choose to call a ring group.
Create as many actions as you wish. Be sure to click
when done. To choose your opening menu and to set the timing
for your Auto Attendant, click Auto Attendant and then
General Settings.