Installation guide

AT&T SB67010/AT&T SB67030 Installation Guide 20 Web User Interface (WEBUI) Overview
Auto Attendant Configuration
 To set up the Auto Attendant Timing:
Figure 27. Auto Attendant Menu
Figure 28. Set Schedule
1. Click Auto Attendant in the left navigation
menu.
2. To set whether the system or the operator
answers the phone and to set the times for
different opening messages to callers, locate
Enable Auto Attendant: shown in Figure 27
and click one of the following buttons:
z To automatically change the message with
the time of day, select the Scheduled button.
You cannot automatically set or schedule
Lunch mode.
a. Set the start times for day and night
modes for each day of the week, or
accept the default times at the bottom
portion of the screen shown in Figure 28.
Click on the drop-down boxes to adjust
the time. Minutes are set in five-minute
increments. Selecting the three dots
shown in the hour drop-down box (...)
extends the previous mode.
b. Select the menu you created for that time
from the appropriate Opening Menu
Selection. See “Creating Auto Attendant
Menus” on page 22.