Installation guide

AT&T SB67010/AT&T SB67030 Installation Guide 16 Web User Interface (WEBUI) Overview
Web User Interface (WEBUI) Overview
Once a Gateway and at least one Deskset are connected to the LAN, you can use the Web User Interface (WEBUI) to administer
the system. Only one person should log in as System Administrator at a time to prevent accidentally overwriting and losing
intended changes.
 To access the Browser Interface:
Figure 22. Deskset Information Screen
Figure 23. Browser Entry
1. On your Deskset, click MENU.
2. To display the Deskset Information screen shown in Figure 22,
press 4 on the dial pad.
3. Find your IP Address
on the Deskset
Information screen.
4. Open a browser on a
PC on the same
network as the
Deskset. AT&T
recommends Internet
Explorer 6 or higher
for best performance.
5. Type the Deskset IP
address in the address bar, as show in Figure 23, and press ENTER. The
Browser displays a login screen, as shown in Figure 24.
6. Enter admin in the Login Name: field and 12345 in the Password
field, then click . You may change your User ID and password
once you are logged in.
IP Address
IP Address
Figure 24. Login