Installation guide

AT&T SB67010/AT&T SB67030 Installation Guide 15 Gateway Installation
Gateway Reset
Press the RESET button shown in Figure 21 by inserting a pen or paper clip into the hole and applying pressure to the button.
 Pressing the RESET button for less than five seconds reboots the Gateway (your system settings are unaffected).
 Pressing the RESET button for more than five seconds resets the Gateway to factory defaults and clears the system
configuration (Auto Attendant settings, Ring Groups, Hold message, and System Directory).
Figure 21. Gateway Reset Button
DC 5.1V
LINE 1
LINE 2 LINE 3 LINE 4 BYPASS
LAN
RESET
LINE 1
LINE 2
LINE 3
LINE 4
POWER
SELECT CANCEL
DOWN
UP
+-
Reset Button