Installation guide

AT&T SB67010/AT&T SB67030 Installation Guide 14 Gateway Installation
Gateway Indicators
Figure 20 provides an illustration of the Gateway display and
indicators.
Line LEDs indicate the following status for each PSTN line:
Red Disconnected
Off Connected
Green steady In use
Green flashing quickly Ringing
Configuration
The Gateway searches for a Dynamic Host Configuration Protocol (DHCP) server and automatically assigns the IP address and
configures the system. You can use either the Gateway menu or the WEBUI for configuration. This document describes using the
WEBUI starting on page 16, which is more convenient.
Refer to the “SB67010 PSTN Gateway, SB67030 Deskset System Administrator’s Guide” for information on configuration
using the Gateway menu.
CAUTION: AT&T does not recommend using a Static IP. Contact the installer at the number on the cover of this
guide if static IP editing is required.
Power LED
Line LEDs
Menu Navigation
Figure 20. Gateway Indicators and Controls