User`s guide

Web Interface 88
Syn248 SB35020 Deskset User’s Guide Back to Contents
Accessing the Web User Interface (WebUI)
To access the WebUI:
1. Ensure that your computer is connected to the same network as the Syn248 system.
In most cases, your computer will already be connected to the network through the
PC port on the back of a Deskset.
2. On the Deskset, press MENU then 4 to display Deskset Information.
3. On the Deskset Information screen, find the IP Address.
4. On your computer, open an Internet browser. AT&T recommends Internet Explorer (7
or higher).
5. Type the Deskset IP address in the browser address bar, and press ENTER on your
computer keyboard.
6. A Login page appears.
7. Under Login Name, log in as a user by typing your extension number.
8. Enter your password if you have created one (see “Setting, Changing, or Resetting
Your Password” on page 83). Otherwise, leave the password blank.
9. Click .
 You can create or change your user password once you are logged in.
 The Basic Settings page shown in Figure 28 on page 90 appears.
++G(H (
@ >'!
'F+'((I
G$?++ 
J;B;;
Changing a setting does not instantly apply the new value. Clicking
saves and applies all changes on that page.