Specifications
Syn248 Installation and Configuration Guide Back to Contents
Device Configuration 73
Gateway Front Panel Interface
You can access basic information and perform some configuration tasks using the
Gateway’s front panel. Most of these tasks are easier to do using the WebUI. See
“Logging in to the WebUI” on page 27.
The Gateway displays the Idle screen after completing the power-up sequence. Use the
Gateway Main menu to perform some system operations.
To access the Gateway Main menu from the Idle screen, as shown in Figure 18, press the
SELECT key.
Figure 18. Gateway Idle Screen
From the Main menu you can access Device Information, Network Status, and the
Configuration menu.
Figure 19. Gateway Menu Screens
Press the DOWN key to highlight an entry, then press SELECT to see information about
your Gateway or your Network.
On the Device Information screen, you can view:
On the Network Status screen, you can view:
Select Configuration to view or modify some Gateway settings. See “Gateway
Configuration” on page 74.
Press CANCEL to return to the Main Menu.
Model #
Serial #
Boot Version
Software Version
Firmware Version.
IP Address
Subnet Mask
Default Gateway
DNS Server x
MAC Address
Network Port
Local Address.
30)(%
3671/LQHV
6\QFKURQL]HG
,3
DHYLFH,QIRUPDWLRQ
NHWZRUN6WDWXV
Configuration