Specifications

Syn248 Installation and Configuration Guide Back to Contents
Device Configuration 71
SB35010 Gateway Features
Figure 16 illustrates the Gateway features and connections.
Figure 16. Gateway Features and Connections
DC 5.1V
LINE 1
LINE 2 LINE 3 LINE 4 BYPASS
LAN
RESET
LINE 1
LINE 2
LINE 3
LINE 4
POWER
SELECT CANCEL
DOWN
UP
+-
1
2
3
4 5 6
1. Display Provides system and network status, device information, and
configuration data. See “Gateway Front Panel Interface” on
page 73.
2. Reset Restarts the Gateway when pressed momentarily.
Restores factory defaults when pressed and held for more than five
seconds with the LAN cable disconnected.
3. PSTN Line Ports 1–4 Traditional 2-conductor wiring (FXO—Foreign Exchange Office
Ports).
4. Bypass Port Traditional analog POTS (Plain Old Telephone Service) that is
available during an AC power outage. When the Gateway power
fails, calls on Line 4 are routed to the bypass line.
5. RJ-45 Ethernet Network Port 10Base-T/100Base-Tx with Auto MDI/MDI-X switching.
6. DC 5.1V Power-Supply Jack