Specifications
Syn248 Installation and Configuration Guide Back to Contents
System Configuration 27
Logging in to the WebUI
WebUI information for individual users is contained in the “Web Interface” chapter
of the SB35020 Deskset User's Guide at
www.telephones.att.com/smb.
To access the browser interface and log in:
1. Ensure your computer is connected to the same IP subnet as the Syn248 system. The
easiest way to ensure this is to connect your PC to the PC port on the back of a
Deskset with an Ethernet cable.
2. On the Deskset, press MENU then 4. The Deskset Information screen appears.
Note the IP Address.
3. Open a browser. We recommend Internet Explorer 7 or higher for best performance.
If you are using a different browser, some of the pages presented here may look
different and have different controls.
4. Type the Deskset IP Address as shown in Step 2 in the browser address bar, then
press ENTER.
The Login page appears.
Only one person at a time should log in as the system administrator to
prevent unintentional overwriting of changes.
'HVNVHW,QIRUPDWLRQ
0RGHO1R6%
6WDWXV6\QFKURQL]HG
,3$GGUHVV
You can also use a Gateway IP address (shown in Figure 18 on page 73) to
log in to the WebUI.