Specifications

Syn248 Installation and Configuration Guide Back to Contents

Installation 19

Deskset Installation

Figure 9 identifies the features on the bottom and side of the Deskset. You can install

the Deskset on a desktop or mount it on a wall.

Figure 9. Deskset Connections

1. Network Port The two LEDs next to each network port indicate network

status and AC power status.

 The green LED is on when the Deskset is connected to

the network and has AC power.

 The yellow LED flashes when there is network activity.

2. PC Port Intended for connecting an end-user PC to share the same

LAN connection as the Deskset.

3. Reset Button Restarts the Deskset when pressed momentarily.

Restores factory defaults when pressed and held for more

than five seconds with the LAN cable disconnected.

4. Power Jack For connecting the AC adapter to the Deskset. The Deskset

also supports Power over Ethernet.

5. Corded Headset

Jack

Actual jack location may be different than shown

6. Handset Jack

7. Wall-Mount Slots See “To install the Deskset on a wall:” on page 22.

1 2