User`s guide

Web Interface 94
Syn248 SB35020/SB35025 Deskset User’s Guide Back to Contents
Basic Settings
The remaining procedures in this chapter assume that you are already logged in to the
WebUI. See “Accessing the Web User Interface (WebUI)” on page 92
.
After logging in, the Basic Settings page appears as shown in Figure 28. Your
Extension Name, which the system administrator enters, is displayed on internal calls.
Figure 28. Extension Basic Settings
To modify the Basic Settings:
1. If Intercom Auto Answer is enabled on your Deskset (see “Intercom Auto Answer”
on page 79), you can:
a. Disable Intercom Auto Answer.
b. Set the Intercom Auto Answer Delay from 0 to 45 seconds. Your Deskset
automatically answers intercom calls after the delay time you select.
2. Under User Password, create or change your Deskset password. The password must
consist of numbers only and can be up to six digits long. This password is also used
for accessing messages and settings on the Deskset and on the WebUI.
3. Click to save your changes.
If Intercom Auto Answer is disabled from the Deskset, this setting does not
appear.