User`s guide

Deskset Settings 86

Syn248 SB35020/SB35025 Deskset User’s Guide Back to Contents

Registering an Optional Cordless Headset (SB35025 Only)

You can register one AT&T DECT Cordless headset to a SB35025 Deskset. When a

Deskset has a cordless accessory, the Deskset and headset are all part of the same

extension, and only one device can be used at a time.

To register a cordless headset:

1. Press (MENU), then 2, and then 6.

The Cordless Headset menu appears.

2. Remove and replace the cordless headset from its charging base.

3. Press . Registration in Progress... appears while the Deskset searches

for the headset.

4. When registration is complete, Headset is registered appears.

5. Press (CANCEL). The User Settings menu appears.

The headset must be in the charger, fully charged and deregistered from any

other device before registration can proceed. Remove and replace the cordless

headset before you press on the Deskset.

While registration is in progress, registration can be terminated by pressing

(CANCEL) on the Deskset.

If the cordless headset is registered to another Deskset, it must be

deregistered first. See “Deregistering a Cordless Headset” on page 87.