Installation Manual

Caller ID
This product supports caller ID services oered by most telephone service
providers. The base unit stores caller ID information for the last 50 incoming
calls.
Missed call indicator
When the base unit is in idle mode and has new or missed calls, its screen
shows XX Missed calls.
Each time aer you reviewed a new call log entry, the number of missed calls
decreases by one. If the base unit resumes power aer power outage, the
missed call indicator goes away.
Review and dial a number in the call log
1. Press in idle mode -> or to scroll through the list.
2. Press to call when the desired entry is displayed.
Save a call log entry to the phonebook
1.
Press in idle mode -> or -> .
2.
Press -> Store to PB -> .
3.
Edit the telephone number -> .
4.
Edit the name -> .
Phonebook
The phonebook can store up to 50 entries.
Operation Steps
Adding an entry
1. Press in idle mode.
2. Press to select Phonebook.
3. Press or -> Add contact -> .
4. Enter a telephone number up to 30 digits -> .
5. Enter a name up to 15 characters -> .
Searching/
dialing an entry
1. Press in idle mode.
2. Press or to browse through the phonebook, or press
the dialing keys (0-9) to start a name search.
3. Press to call.
For a full set of installation and operation instructions, refer to the
SB3014 DECT 6.0 conference speakerphone with wireless mics
user’s manual provided in the package, or see the online user’s manual at
www.smbtelephones.att.com.
For customer service or product information, visit our website at
www.smbtelephones.att.com or call 1 [phone]. In Canada, dial
1 [phone].
© 2014-2017 Advanced American Telephones. All Rights Reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219.
Printed in China. Issue 4.0 AT&T 08/17.
Initial settings
We recommend you program your base unit before use. The
following are a few examples of common features to set before using the base
unit. Refer to the Conference speakerphone settings in the user’s manual for
detailed instructions on setting all features.
Set date/time
Set the date/time before use.
1. Press -> or -> Set date/time -> .
2. Enter the month, day and year using the dialing keys -> .
3. Enter the hour and minute using the dialing keys.
4. or to choose AM or PM -> .
Ringer volume
You can set the ringer volume level to one of the six levels, or turn the
ringer off.
Press or in idle mode to sample each ringer volume level -> .
-OR-
1. Press -> or -> Ringers -> .
2. Press to select Ringer volume.
3. Press or to choose the desired level -> .
•
Reset language to English
If you have accidentally changed the screen display language and want to
switch it back to English, follow the step, as mentioned below.
Press in idle mode-> enter
364
.•
Speakerphone operation
Operation Steps
Making a call
Press -> Enter the telephone number.
On-hook dialing
(predialing)
Enter the telephone number -> Press to call.
Answering a call
Press .
Ending a call
Press .
Using a wireless
mic to join a call
in progress
During a call, push the wireless mic and li it from the
charging cradle.
Last number
redial
Press .
Volume control
Press to increase or press to decrease the listening
volume during a call.
Call waiting
(Requires
subscription from
telephone service
provider)
Press to put current call on hold and to take the new
call; press again to switch back and forth between
calls.
Temporary
ringer silencing
When the base unit is ringing, press
MUTE
ALL
.
Mute a call
During a call, press
MUTE
ALL
on the base unit or on a wireless
mic.
Three-way
conference
1. -> Dial the number of the rst call.
2. When the first call is connected, press .
3. Enter the number of the new outgoing call.
4. When the second call is connected, press .