Specifications

Table 6-4 Amplifier Levels
Level
1
Voltage
0.5 Vrms
dBu
-3.8
2
0.655 Vrms -1.5
3
0.86 Vrms
0.9
4
1.1 Vrms
3.0
5
1.4 Vrms
5.1
6
1.9 Vrms 7.8
7
2.5 Vrms 10.2
8
3.4 Vrms 12.7
To enable or disable Station Page, Music, Talkback, Night Bell, Pass
DTMF to Zone, Microphone Page, or Door Alert:
1.
2.
NOTE: See “Zone Programming 3.
Options” on page 6-3 for
descriptions of the options
provided.
Access the PagePac System (see page 6-5).
Dial [*]
[*] (followed by the programming password, if one has been
configured).
You will hear the special programming mode dial tone.
Dial the appropriate buttons to change or verify an option:
Station Page
Enabled
Music
Enabled
Talkback
Enabled
Night Bell
Enabled
Pass DTMF to
Zone Enabled
Microphone
Page Enabled
Door Alert
Enabled
[7] [2] to change
[7]
[4] to change [7] [6] to change
[7]
[8] to change
[9]
[0] to change [9] [2] to change [9] [4] to change
[7] [3] to verify
[7]
[5] to verify [7] [7] to verify [7] [9] to verify [9] [1] to verify [9] [3] to verify [9] [5] to verify
4.
5.
If configured correctly, you will hear the Configuration tone (two
beeps). (If configured incorrectly, you will hear the Error tone, and
will be returned to the Programming Mode dial tone.)
Dial [1]
for zone 1, [2] for zone 2, or [3] for zone 3 (Zones 1 and
2 only for Talkback).
If dialed correctly, you will hear the Configuration tone again (two
beeps.) (If configured incorrectly, you will hear the Error tone, and
will be returned to the Programming Mode dial tone.)
Dial [0]
to disable; dial [1] to enable.
If dialed correctly, you will hear the Configuration Complete tone
(three beeps). (If dialed incorrectly, you will hear the error tone.) You
will be returned to the programming dial tone.
6-8 Programming