Specifications

Zone Programming Procedures
To program Type of Zone, Door Action, Page/Tone Level, or Music
Level (Zones 1 and 2 only):
1. Access the PARTNER PagePac System (see page 6-5).
NOTE: See “Zone Programming
Options” on page 6-3 for
descriptions of the options
provided.
Type
of Zone
Door
Action
Page/Tone Level
Music
Level
[6] [0] to change
[6]
[1] to verify
[6]
[2] to change
[6]
[3] to verify
[6]
[4] to change
[6]
[5] to verify
[6] [6] to change
[6] [7] to verify
Type
of Zone
Door
Action
Page/Tone Level
Music
Level
NOTE: The [#] key can be
pressed to cancel an
uncompleted programming
option; you will hear the
programming mode dial tone.
2. Dial [*] [*] (followed by the programming password, if one has been
configured).
You will hear the special programming mode dial tone.
3. Dial the appropriate buttons to change or verify an option:
If configured correctly, you will hear the Configuration tone (two
beeps). (If configured incorrectly, you will hear the Error tone, and
will be returned to the Programming Mode dial tone.)
4. Dial [1]
for zone 1 or [2] for zone 2.
If dialed correctly, you will hear the Configuration tone again (two
beeps.) (If configured incorrectly, you will hear the Error tone, and will
be returned to the Programming Mode dial tone.)
5. Dial the appropriate button to choose an option:
[1] for Page/Speaker [1] for Door Alert
[1] through [8] for [1] through [8] for
[2] for Doorspeaker
[2] for Ring Down
Amplifier Level (See
Amplifier Level (See
Table 6-4) Table 6-4)
[3] for Remote Amplifier
6.
If dialed correctly, you will hear the Configuration Complete tone
(three beeps). (If dialed incorrectly, you will hear the error tone.) You
will be returned to the programming dial tone.
To terminate the programming mode, press [#] .
You will hear the PARTNER PagePac dial tone.
Programming
6-7