Specifications

Overview
After installing the Partner PagePac hardware as described in Sections 2
through 5, you can customize the system to meet the requirements of your
business. This chapter describes available programming options and
procedures.
Programming Options
There are two types of programming options. System Options affect the
overall operation of the system. Zone Options affect the operation of a
single zone.
System Programming Options
Disable this feature if operating
in Silent Monitor mode (Dry Loop
or Trunk Adapter Mode).
If Pre-Announcement Tone is
disabled, the Talkback feature
must be turned on for the
Talkback Warning Tone to be
heard.
■
■
■
■
■
Connect Password —Requires a user who dials in through the
telephone interface to enter the correct password before being
permitted to use the system. A special dial tone indicates that the
system is waiting for the Connect Password to be entered. This option
is disabled by default.
Programming Password —Requires a user who dials in through the
telephone interface to enter the correct password when the
programming mode is entered. A programming confirmation tone
indicates a correctly entered programming password. This option is
disabled by default.
Door Unlock Code —Specifies the sequence of digits a user must
enter in order to activate the contact closure (door strike plate) for the
active door. The default value is 6736 (corresponding to the letters
OPEN on the keypad).
Pre-Announcement Tone Enabled —Sends a tone to a zone (and to
the user’s station, for a telephone page) when the zone is selected.
(Available in all zones.) This option is enabled by default.
(Automatically turned off when calling a doorspeaker.)
Talkback Warning Tone Enabled —Sends a tone to a zone (and to
the user’s station, for a telephone page) when the page is selected in
talkback mode, advising anyone within range of the zone that
conversation is being monitored. (Available in Zones 1 and 2 only.)
This option is enabled by default.
Confirmation Tone Enabled —Sends a tone to the user’s station (for a
■
telephone page) when a zone is selected. This is ignored if
Pre-Announcement Tone or Talkback Warning Tone is enabled
(available in all zones). This option is enabled by default.
Reset to Factory Defaults —Causes all System and Zone parameters
to revert to their factory default settings. (See Tables 6-1 and 6-2 for
factory default settings.)
■
6-2 Programming