Specifications
6. Dial [#] (to return to PARTNER PagePac dial tone).
You should hear the PARTNER PagePac dial tone in the telephone
receiver.
Zone 3 Test (automatically is set for remote amp)
NOTE: Zone 3 will always
be configured as a remote
zone and does not need to
be programmed as a
remote zone.
7.
8.
9.
Dial [3] (for zone 3 page).
You should hear the pre-announcements tone (3/4 second tone) out
of the zone 3 loudspeakers. All other zones will be quiet.
Speak into the telephone transmitter.
You should hear your voice over the loudspeakers.
Dial [#]
(to return to PARTNER PagePac dial tone).
You should hear the PARTNER PagePac dial tone in the telephone
receiver.
Zone 1 or 2 Test (Configured as a Remote Amp)
NOTE: If paging system does not
If zones 1 and/or 2 have been configured as a remote amp zone, you will
respond as indicated, refer to
need to tell (program) this
to the PARTNER PagePac module before you
“Troubleshooting”, Appendix A.
can page to those zones.
Quick Programming
1. Dial [*]
[*] (to start programming).
You should hear a different dial tone in the telephone receiver.
2. Dial [6]
[0] (for type of zone).
You should hear two beeps followed by the programming mode dial
tone in the telephone receiver.
3. Dial the zone number you wish to program as a remote zone (1, 2).
You should hear two beeps (again) in the telephone receiver.
4. Dial [3]
(selecting a remote amp).
You should hear three beeps in the telephone receiver, followed by
the programming mode dial tone.
Test
5.
6.
NOTE: If another zone has been
7.
configured as a remote amp
zone (zone 1 or 2) repeat the
above steps but change the zone
number dialed in step 6.
Dial [#] (to return to PARTNER PagePac dial tone).
You should hear the PARTNER PagePac dial tone in the telephone
receiver.
Dial the zone number you have configured as a remote amp (1 or 2).
You will hear the pre-announcement tone over the selected zone’s
loudspeakers.
Speak into the telephone transmitter.
You should hear your voice over the loudspeakers.
3-8 Page/Speaker Mode Installation