Specifications

Quick Test (Paging to Loudspeakers)
■ At this point your PARTNER PagePac module has been installed along
side your PARTNER Plus or PARTNER II phone system. In addition,
you should have installed the necessary speakers, connecting blocks,
and wiring within your business.
■ The following test will ensure your PARTNER PagePac module is
operating correctly by making a page over the loudspeakers to zone 1,
zone 2, and zone 3 (remote amp).
You Will Need:
NOTE: If tests do not
result in proper paging
over loudspeakers, refer
to “Troubleshooting” in
Appendix A.
A Remote Amp zone, refers
to a primary zone configured as
a remote amp (with a separate
amp). This is output (fixed) from
AUX port.
A PARTNER System telephone (do NOT use a standard telephone).
To Access the PARTNER PagePac Module
For Dry Loop Mode (connection to Page Port) you will need to dial:
[INTERCOM] [7] [0].
For Station Mode operation, you will need to dial [INTERCOM],
followed by the extension number connected to the PARTNER
PagePac paging system. For example, if you have configured your
PARTNER PagePac paging system with a cable connecting from the
PARTNER PagePac STN l/N port to extension 20 of the PARTNER
Plus system module, you would dial [INTERCOM]
[2] [0] the first time
you wish to access PARTNER PagePac features and programming
capabilities.
For Trunk Adapter Mode you will need to select the trunk which is
connected to the PARTNER PagePac unit by pressing the
appropriate [LINE] button. For standard telephone access, use Direct
Line Pickup.
Zone 1 Test (For NON-remote amp configurations)
1.
2.
3.
Dial [1] (for zone 1 page).
You should hear the pre-announcement tone (3/4 second tone) out of
the zone 1 loudspeakers. All other zones will be quiet.
Speak into the telephone transmitter.
You should hear your voice over the loudspeakers.
Dial [#]
(to return to PARTNER PagePac dial tone).
You should hear the PARTNER PagePac dial tone in the receiver.
Zone 2 Test (For NON-remote applications)
4. Dial [2]
(for zone 2 page).
You should hear the pre-announcement tone (3/4 second tone) out
of the zone 2 loudspeakers. All other zones will be quiet.
5. Speak into the telephone transmitter.
You should hear your voice over the loudspeakers.
Page/Speaker Mode Installation
3-7