Specifications

CAUTION:
A remote amplifier can be within the same building as the PARTNER
PagePac module or at a remote location. The auxiliary paging zone port is
For remote amplifier locations, a
located at the front of the PARTNER PagePac module and is a modular
PageGuard (P/N 22050-930) or
PARTNER IROB (PEC 60612)
connector labeled AUX AMP (see Figure 1-1). This zone can be used for
may be required for protection
paging, background music, and tones. The 0 dBm output is suitable for
from potential telephone network
driving an amplifier, but is not suitable for direct connection of the speaker.
electrical disruptions (refer to
The AUX AMP port provides two leads for the audio pair and two leads for
Appendix B)
contact closure (see Figure 3-1).
REMOTE/AUXILIARY AMP CONNECTIONS
PARTNER
PAGEPAC
MODULE
HORN
SPEAKER
TO ZONE 1,
ZONE 2, OR
ZONE 3
AUXILIARY AMPLIFIER
(AMPLICENTER D300)
AUDIOPAIR
AND CONTACT
CLOSURE PAIR
FROM ZONE 1 OR 2
(ZONE 3 IS 0 dBm)
USE APPROPRIATE
TELEPHONE RJ CABLE
FROM EXTERNAL
MUSIC SOURCE
D300
OUT TO
AUXILIARY AMPLIFIER BACK PANEL
SPEAKERS
(EXPANDED VIEW)
SHEILDED
CABLE
AC POWER
TO PAGE INPUT
OF AMPLIFIER
Figure 3-1 PARTNER PagePac Connections ( Zones 1, 2, or 3) to a Remote Amplifier
Page/Speaker Mode Installation 3-3