Specifications
PARTNER PagePac Telephone Access
Continuing
Installation ...
NOTE: Once you have
completed the Page/Speaker
Mode installation steps in Section
3, you can use the Quick Test
procedure at the end of that
section.
Establishing telephone access provides a means to talk to the PARTNER
PagePac unit for programming and accessing the various features.
If you have configured your PARTNER PagePac system:
For Dry Loop Mode (connection to Page Port) you will need to dial
[INTERCOM]
[7] [0].
For Station Mode operation, you will need to dial the extension number
connected to the PARTNER PagePac paging system. For example, if you
have configured the PARTNER PagePac paging system with a cable
connecting from the PARTNER PagePac STN l/N port to
extension 20 of a PARTNER Plus system module, you would dial [INTERCOM]
[2] [0] the first time you wish to access PARTNER PagePac features and
programming capabilities.
For Trunk Adapter Mode you will need to select the trunk which is
connected to the PARTNER PagePac unit by pressing the appropriate
[LINE] button. For standard telephone access, use Direct Line Pickup.
Each input to the PARTNER PagePac module has its own priority. If more
than one input is active at the same time, the signal with the highest
priority will take precedence over all the others. In addition, if a
higher-priority input becomes active while a lower-priority input is being
processed, the PARTNER PagePac module will abandon the lower-priority
input in favor of a higher priority input.
The input priorities, from highest to lowest, are as follows:
■ Microphone input
■ Station input
■ Door input
■ Night Bell input
■ Music input
Your PARTNER PagePac should now be installed (mounted to a wall or
placed onto a desk), and your PARTNER PagePac module has been
connected directly to your PARTNER Plus or PARTNER II phone system.
Section 3 continues the installation steps for PAGE/SPEAKER MODE and
covers Zone 1 & 2 remote amp configurations along with Zone 3 auxiliary
paging features. At the end of Section 3 is a Quick Test to ensure your
installation has been successful.
Section 4 deals exclusively with DOORSPEAKER MODE and what is
necessary to configure Zones 1 or 2 for doorspeaker functions. Section 4
also provides a Quick Test to ensure proper installation.
Installation
2-15