Specifications

IMPORTANT:
■ Dry Loop Mode is the preferred method of connection to the PARTNER
Dry Loop Mode
Plus or PARTNER II Communications system.
Considerations
■ Once the PARTNER PagePac module has been accessed, the unit will
remain active until the user takes some action, i.e. “hangs up.”
IMPORTANT:
To ensure full use of "PFT" (Power Failure Transfer) in your PARTNER
Station Mode
Plus or PARTNER II phone system during an emergency or power outage
Considerations
conditions when selecting “Station Mode,” these extensions are NOT
recommended for use for primary paging access:
■
■
■
■
PARTNER Plus system: Stations 10, 11, 16, 22, 28
PARTNER II system: Stations 10, 11, 16, 22, 28, 34, 40, 46, 52
Remove all CO lines using the “Line Assignment” feature. Refer to
your PARTNER Plus/II Installation and Use manual.
For Station Mode “Automatic Privacy” should be set to “Assigned” for
the station designated as the PagePac station interface. Refer to your
PARTNER Plus/II Installation and Use manual under “Automatic
Privacy.”
During a page, if 30 seconds elapses without any activity, the PagePac
system will automatically hang up.
All pages are limited to a maximum of 2 minutes in duration. The
■
■
PagePac system will automatically hang up once this time is exceeded.
IMPORTANT:
Do NOT use these Central Office lines for these systems:
Trunk Adapter Mode
■ PARTNER Plus system: CO lines 1, 3, 5, 7
Considerations
■ PARTNER II system: CO lines 1, 3, 5, 7, 9, 11, 13, 15
■ For Trunk Adapter Mode “Automatic Privacy” should be set to
“Assigned.” This avoids users from bridging onto the paging system.
Refer to your PARTNER Plus/II lnstallation and Use manual under
“Automatic Privacy.”
■ A standard telephone can access the paging system by using Direct
Line Pickup; refer to your PARTNER Plus/II lnstallation and Use
manual.
■ If the PARTNER PagePac module has been accessed, the unit will
remain active until the user takes some action, i.e. “hangs up.”
2-12 Installation