Specifications

Important Safety Instructions
Always follow these basic safety precautions when using the PARTNER
PagePac paging system and PARTNER Plus or PARTNER II phone
system.
1.
2.
3.
4.
5.
6.
7.
Read and understand all instructions.
Follow all warnings and instructions marked on the product.
DO NOT block or cover ventilation slots and openings. They prevent
the product from overheating. DO NOT place the product in an
enclosure that does not have sufficient ventilation.
Never spill liquid on the product or drop objects into the ventilation
slots and openings. Doing so may result in serious damage to the
components.
Repair or service must be performed by a qualified repair person.
The product is provided with a three-wire grounded type plug. This is
a safety feature. Do not defeat the safety purpose of the grounding
type plug. DO NOT staple or otherwise attach the AC power supply
cord to the building or surface.
DO NOT use the product near water or in a wet or damp place (such
as a wet basement).
Additional Safety Instructions for Installation Personnel
Install the product to meet all the environmental and electrical
requirements listed in the specifications (see page 1-5).
1.
2.
3.
4.
5.
DO NOT install telephone wiring during a lightning storm.
DO NOT install telephone jacks in a wet location unless the jack is
specially designed for wet locations.
Never touch uninsulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
The PARTNER PagePac unit must be securely wall mounted.
CAUTION:
If any wiring from the extension jacks leave the building premises, you must
install AT&T 503A1 IROB protectors (see Appendix B).
2-2 Installation