Installation guide

Computer Monitor Paging Log
Is a PC computer connected to the RS-232 port of the PagePac Plus
Controller for the purpose of logging paging activities? If so, you will want
to program the controller to send signals to it, and turn ON/OFF the
Attendant Access, Telephone Access, and Night Bell signals that would
trigger the monitor to log the event.
Figure A-6 shows a typical computer monitor interface for logging purposes.
For programming information, see section 2 table 2-9 to select the
computer monitor option, and table 2-10 to select default inputs to the
monitor.
Application Notes A-11