Installation guide

Chart 4. Input Zone / Group Configurations
Feature
Mode Option/
Verify
Dial
Listen
For
Zone/Group
Selection
Listen
For
Choose Option
Listen
For
Default
Activate
Tone via an
Input
Closure
To Select
To Verify
92 Double Enter the
93 Beep input zone
number.
Double
Beep
0 – None
1 – Chime
2 – Siren
3 – Warble Siren
4 – Night Bell
5 – Fast Ring
6 – Steady Tone
7 – Door Bell
Triple
None
Beeps
Tone
Routing
To Select
94 Double Enter the
Double
Output Triple None
To Verify
95 Beep
input zone Beep
zone/group Beeps
number. number
Audio
Source
Enabled
To Select
To Verify
96 Double Enter the
Double
0 – None Triple None
97 Beep input zone
Beep
1 – AA Beeps
number.
2 – T/R
Audio
Routing
To Select
To Verify
98
Double Enter the
Double
Output Triple None
99 Beep input zone
Beep zone/group Beeps
number.
number
NOTES:
Program the PagePac PIus using the ALlAS numbers, if optioned. Otherwise, use Physical zone/group numbers
Exit the programming mode by dialing #
The # key will terminate a digit string (i.e. Zone Numbers string)
The Copy Command
Copy Dial 12 Double
Enter zone
Double Enter the Double Enter end of Triple
Command
Beeps number that is
Beeps
beginning of
Beeps
the range. Beeps
to be copied. the range.
2-40 Programming The Controller