Installation guide

Error Tones
Hear error tone
when dialing a zone
ALIAS number
Error tone received
when programming
a zone or group
The Error Tone is heard over the phone receiver when an incorrect zone
number has been dialed or contradictory programming input has been
attempted.
When a zone is selected by Touchtone telephone keypad input (DTMF),
the PagePac Plus searches for the zone in numerical order of the physical
zones; the value dialed (the ALIAS number) is then compared to the digits
stored in memory for each physical zone. If not found, then an error tone
will be returned to the user. Refer to your Zone Map (table 1-2) to review
your ALlAS number assignments, and see table 2-12 to review of the Zone
Map Option programming steps.
If ever there is a conflict in the programming options between a zone and
a group to which it is assigned (i.e., zone 1 is optioned as an input as an
individual zone, but is optioned as an audio output as part of a zone
group), then an error tone will be returned to the user’s receiver.
Zone group configurations will override individual zone configurations
whenever a zone group is selected. Refer to your filled-in Zone Map
(table 1-2) and Zone Configuration Tables (1-3 and 1-4) to identify any
conflict, and refer to table 2-13 for programming steps to reprogram the
erroneous zone.
2-36 Programming The Controller