Installation guide

About This Guide
READ THIS GUIDE FIRST, before using the Installation Guide to install
PagePac Pius equipment. You will need to complete the Zone Map (table
1-2) and Zone Configuration Tables (tables 1-3 and 1-4) to lay out your
paging system zones before setting switches on the equipment and before
programming the controller unit.
After programming the unit, fill out the User Quick Reference Card, at the
end of section 3, and distribute to all system users.
NOTE TO INSTALLER
Leave this guide with the System Administrator or other person
responsible for managing/modifying the PagePac Plus system.
This guide explains features, and their application, to program the
PagePac Plus Control Unit to provide the paging functions that your facility
requires.
It also gives complete instructions for operating the PagePac Plus system
from your phone, once it’s installed and configured.
The pronoun "he," as used herein to refer to the user, is intended to
encompass users of either gender.
How to Use This Guide
■
■
■
■
Overview and Features. For a thorough description of PagePac Pius
capabilities and features, refer to section 1.
Programming Instructions. Section 2 provides step-by-step
instructions for programming the configuration of your PagePac Plus
paging system, using a Touchtone telephone keypad. For
programming instructions using a PC computer, see the separate
instructions accompanying the software diskette. Section 2 describes
in detail the various configuration options that are to be selected. You
can change your system’s settings easily to accommodate new or
expanding needs.
Operations Instructions. Section 3 gives step-by-step instructions for
using your PagePac Plus-controlled paging system, once its
configuration has been set. A User Quick Reference Card is included
at the end of section 3.
Equipment Installation. For detailed instructions about installing the
PagePac Plus Control Unit, Zone Expansion Unit(s), Amplicenter(s),
and interconnect cabling, refer to the Installation Guide.]
vii