Installation guide

Input Priority Arrangement
NOTE: These priorities cannot
be rearranged.
Also, if you select more than one
zone to be inputs of the same
level (Input 1, for example), such
inputs will be handled on a first
in, first served basis. See Type
of Zone option, under General
Zone / Group Configurations
programming, later in this section.
The input priorities are pre-set at the factory. You may only assign a
priority level to inputs such as doorbell or security alarm, by assigning
them to Input #1 or Input #2, which differ in priority.
The default setting is:
1 – Attendant Access
2 – Input #1
3 – Telephone Access
4 – Input #2
5 – Night Bell
Music (always lowest priority)
2-20 Programming The Controller