Installation guide

Forgot the Password?
In the event that either or both the connect password and programming
password are forgotten, it will be necessary to call the Harris-Dracon
Technical Help line (1-800-437-2266) for instructions how to erase the two
passwords and be able to enter new ones.
Confirmation Tone ON/OFF
Your choice for this selection is ON or OFF, with the default setting as ON.
When the option is ON, a tone will be sent to the telephone interface after
a zone has been selected and before a page can be made.
Programming Steps
First access the PagePac Plus system and enter the programming mode
by pressing [
* ] [ * ] and entering your Programming password (if optioned).
You may exit the programming mode by dialing [
# ].
1.
Dial [ 4 ] [ 0 ] to select this option.
Hear a DOUBLE beep.
2.
Dial [ 0 ] to turn OFF. Dial [ 1 ] to turn ON.
Hear TRIPLE beeps.
To verify the condition (OFF or ON) of the Confirmation tone, dial [
4 ] [ 1 ]
and repeat step 2 above.
These actions are summarized in table 2-5.
Table 2-5. Confirmation Tone ON/OFF
Feature
Mode Option/
Verify
Dial
Listen
For
Choose Option
Listen
For
Default
Confirmation
To Select 40 Double
0 — Off
Triple
On
Tone
To Verify
41
Beep 1—On Beeps
Programming The Controller 2-11