Installation guide

Managing the System
Installing System Hardware
Please refer to the Installation Guide for complete instructions for installing
the PagePac Plus Unit, Amplicenter, and Zone Expansion Units, to form a
fully integrated functional paging controller system in your facility.
Changing System Settings
You can change the Control Unit’s settings easily to accommodate new or
changing needs. Section 2 gives instructions for making whatever
changes are needed – by using your telephone keypad or a PC computer
to re-configure parameters stored in the PagePac Plus’s memory. You
can change the manner in which paging zones are laid out, or you can
re-define the nature of the inputs and outputs of the system.
Training Co-Workers
Section 3, "Using the PagePac Plus Paging System," explains how to use
your telephone set to access the paging system, how to select paging
zones, how to answer a door bell and unlock the door, and other features.
To help with this task, give each telephone user a copy of the User Quick
Reference Card, found at the end of section 3.
Solving Problems
The Installation Guide gives information on solving installation problems
and ordering additional accessories and equipment. If your system
malfunctions, you may be able to solve the problem by following the steps
provided in the "Maintenance and Troubleshooting" section of the
Installation Guide. If you receive error tones or error messages from the
system, refer to "Error Tones" at the end of section 2. If you still need
help, call the 24-hour AT&T National Service Assistance Center:
1-800-628-2888.
1-6 Overview