Specifications

2
NOTE: The optional audio
background music source can
be a CD or tape player, AM,
FM, or commerical radio, or
other audio device.
LOW FREQ
CUT-OFF
AMPLICENTER
BACK PANEL
STEREO
MONO
3
NOTE: If more than one
speaker cable is routed to the
AmpliCenter a connector block
is necessary. Refer to sample
wiring diagrams on page 10.
AMPLICENTER
BACK PANEL
LOW FREQ
CUT-OFF
DO NOT hook up speaker
wires with AmpliCenter power
plug connected!
4
NOTE: Connect the 4-wire
RJ-11 type plug (used with
telephones) to the Page Input
connector (far right), or use the
Page In terminals.
Use Tip and Ring if installing to
an existing paging system (low
voltage output), VOX activated.
Use Tip and Ring if connecting
to a Loop Start or Ground Start
interface port in host telephone
system.
With a microphone, hook the
mic switch to C1 and Grd, and
the mic output to Tip and Ring.
Connect music input wires to Left, Right, and Ground
terminals, if stereo, or Left and Ground, if not.
70V OUT PAGE IN MUSIC IN
Figure 4. Music Input Connections on AmpliCenter
Hookup speaker cable to AmpliCenter.
70V OUT PAGE IN MUSIC IN
CABLE SHIELDING
TO SPEAKERS
Figure 5. Speaker Connection on AmpliCenter
Connect host telephone system to Amplicenter.
Figure 6. Host Telephone System Connection
5