Specifications

Example System Setups
NOTE: If the AmpliCenter is
used with the PagePac Plus
Controller, refer to the
Controller Installation and Use
Guide for detailed instructions.
Figure 12 illustrates the interconnection between the AmpliCenter and
the Controller, if used. Figure 13 illustrates the interconnection of two or
more AmpliCenters.
AMPLICENTER
SET MODE SWITCH
TO DRY LOOP 600 OHM
POWER and 70V
AUDIO TO
CONTROLLER
CONTROLLER
RS-232 TO PC
INTERFACE TO
TELEPHONE SYSTEM
(OPTIONAL)
POWER, CONTROL, and 70V AUDIO
ZONE CONNECTOR (1-8):
to ZONE EXPANSION UNITS, lF ANY
70V AUDIO OUT, AND CONTROL
SIGNAL IN or OUT.
Figure 12. AmpliCenter Interface with PagePac Plus Controller
FIRST AMPLICENTER
MUSIC
INPUT
AC POWER
CONNECTION
PAGING
CONNECTION
NEXT AMPLICENTER
TO HOST TEL.
SYSTEM
(USE EITHER
METHOD)
TO SPEAKERS
NEXT AMPLICENTER
MUSIC
INPUT
AC POWER
CONNECTION
SET TO
DRY LOOP
600 W
TO NEXT
AMPLICENTER
TO SPEAKERS
Figure 13. Series AmpliCenters, without Controller
11