User guide

DEFINITY Performance Management User Guide, Release 2.0, 585-229-808
9 Set Alerting Parameters
Set Trunk Group Alerting Parameters
Issue 1
November 1998
Page 198
Set Trunk Group Alerting Parameters
Introduction This procedure describes how to override the default trunk group alerting
parameters for a specific managed node.
Procedure To set the trunk group alerting parameters, do the following:
1 From the left window pane, click DEFINITY Systems > [managed node] > Trunk
Groups > Alerting Parameters.
Result: Displays the Grade of Service Alerting Parameters pane for that
managed node. The columns on the left side of the table identify the
trunk group number, name and number of trunks. These columns
cannot be changed. The remaining fields can be changed if the
Default? box is not checked.